Request for Tender for Blending Control Upgrade Project at Smartply Europe DAC ‘25

Smartply Europe DAC operates an Oriented Strand Board (O.S.B.) manufacturing facility at Belview Port Waterford. This modernisation project will target the Blending area of the plant. Project Objectives Upgrade the existing Blending area control system, Motor Control Centre (MCC) and PLC Local and Remote-control cabinets to meet current Smartply Machinery …

CPV: 71314100 Elektriteenused, 48921000 Automatiseerimissüsteemid, 72243000 Programmeerimisteenused, 38810000 Tööstuslike protsesside juhtimisseadmed, 65320000 Elektriseadmete käitus, 71334000 Masinaehitus- ja elektrotehnika teenused
Tähtaeg:
nov. 5, 2025, 3 p.l.
Tähtaja tüüp:
Pakkumise esitamine
Täitmise koht:
Request for Tender for Blending Control Upgrade Project at Smartply Europe DAC ‘25
Auhindade andmise asutus:
SmartPly Europe DAC
Auhinna number:
0

1. Buyer

1.1 Buyer

Official name : SmartPly Europe DAC
Legal type of the buyer : Entity with special or exclusive rights

2. Procedure

2.1 Procedure

Title : Request for Tender for Blending Control Upgrade Project at Smartply Europe DAC ‘25
Description : Smartply Europe DAC operates an Oriented Strand Board (O.S.B.) manufacturing facility at Belview Port Waterford. This modernisation project will target the Blending area of the plant. Project Objectives Upgrade the existing Blending area control system, Motor Control Centre (MCC) and PLC Local and Remote-control cabinets to meet current Smartply Machinery Safety Standards, ATEX compliance and programming Standards. Project scope to include: 4 x Dry bin infeed conveyor system. 4 x Dry Bin slide gates. 3 x Dry Bins. 3 x Blender infeeds system. 3 x Blenders. 1 x Resin, Wax and water addition system. Exclusions: Atomiser control system inside the Blenders OEM scope. • It will be the responsibility of the System integrator to Project Manage all elements of the Blending area control upgrade project i.e. System design, Electrical schematics and calculation’s, Process PLC, Safety PLC, SCADA upgrade, Networking, Risk assessment and risk reduction and Plant area ATEX compliance with reference to applicable standards in appendix 1. Over the course of this project a separate electrical contractor will be appointed to provide independent installation of cabling, containment, connections, and testing. Over the course of this project a separate mechanical contractor will be appointed to provide independent supply and installation of safety guarding and access gates. • The upgrade will include the replacing of existing Legacy PLCs with an Allen Bradley Guard Logix area PLC system. Existing functionality of the current Blender system must be preserved and available following the upgrade. All signal exchange control / safety to other mill PLCs should be maintained and realised in the new area PLC. It will be the responsibility of the System integrator to Program and test the new Blending area Allen Bradley PLC system and provide full Site acceptance testing documentation to the client. It will be the responsibility of the System integrator to provide a Declaration of Conformity for the Blending area PLC Control system upgrade. • It will be the responsibility of the System integrator to coordinate Design and Review meetings with the Client. Appoint an ATEX Designer for the project, deliverables include complete Electrical and Loop drawings for the control system detailing IS calculations, motor control, and device field wiring. Provide Smartply with a field device parts list to replace existing devices which comply with Plant area ATEX requirements Smartply will complete procurement of these parts. The System Integrator is responsible for providing the client with a Blending plant area ATEX verification Dossier on project handover this should include all required information detailed in appendix 2. It will be the responsibility of the System integrator to provide updates for inclusion in the Smartply Explosion Protection Document (EPD)Project implementation Deliverables Project implementation phase must be full installed, commissioned, tested and handed over to the client following the plant 11-day maintenance shutdown. Project preparation work can be completed on plant maintenance days one per month. *** Please note the above is not the full scope of Works - See attached tender Document for the full more detailed scope of Works ***
Procedure identifier : 9755a099-d6a9-4a77-bafa-ac0ffc4653d4
Type of procedure : Open
Main features of the procedure : Please see the Tender Document attached

2.1.1 Purpose

Main nature of the contract : Services
Main classification ( cpv ): 71314100 Electrical services
Additional classification ( cpv ): 48921000 Automation system
Additional classification ( cpv ): 72243000 Programming services
Additional classification ( cpv ): 38810000 Industrial process control equipment
Additional classification ( cpv ): 65320000 Operation of electrical installations
Additional classification ( cpv ): 71334000 Mechanical and electrical engineering services

2.1.2 Place of performance

Country subdivision (NUTS) : Dublin ( IE061 )
Country : Ireland

2.1.3 Value

Estimated value excluding VAT : 675 000 Euro

2.1.4 General information

Legal basis :
Directive 2014/24/EU

2.1.6 Grounds for exclusion

Sources of grounds for exclusion : Procurement Document

5. Lot

5.1 Lot technical ID : LOT-0001

Title : Request for Tender for Blending Control Upgrade Project at Smartply Europe DAC ‘25
Description : Smartply Europe DAC operates an Oriented Strand Board (O.S.B.) manufacturing facility at Belview Port Waterford. This modernisation project will target the Blending area of the plant. Project Objectives Upgrade the existing Blending area control system, Motor Control Centre (MCC) and PLC Local and Remote-control cabinets to meet current Smartply Machinery Safety Standards, ATEX compliance and programming Standards. Project scope to include: 4 x Dry bin infeed conveyor system. 4 x Dry Bin slide gates. 3 x Dry Bins. 3 x Blender infeeds system. 3 x Blenders. 1 x Resin, Wax and water addition system. Exclusions: Atomiser control system inside the Blenders OEM scope. • It will be the responsibility of the System integrator to Project Manage all elements of the Blending area control upgrade project i.e. System design, Electrical schematics and calculation’s, Process PLC, Safety PLC, SCADA upgrade, Networking, Risk assessment and risk reduction and Plant area ATEX compliance with reference to applicable standards in appendix 1. Over the course of this project a separate electrical contractor will be appointed to provide independent installation of cabling, containment, connections, and testing. Over the course of this project a separate mechanical contractor will be appointed to provide independent supply and installation of safety guarding and access gates. • The upgrade will include the replacing of existing Legacy PLCs with an Allen Bradley Guard Logix area PLC system. Existing functionality of the current Blender system must be preserved and available following the upgrade. All signal exchange control / safety to other mill PLCs should be maintained and realised in the new area PLC. It will be the responsibility of the System integrator to Program and test the new Blending area Allen Bradley PLC system and provide full Site acceptance testing documentation to the client. It will be the responsibility of the System integrator to provide a Declaration of Conformity for the Blending area PLC Control system upgrade. • It will be the responsibility of the System integrator to coordinate Design and Review meetings with the Client. Appoint an ATEX Designer for the project, deliverables include complete Electrical and Loop drawings for the control system detailing IS calculations, motor control, and device field wiring. Provide Smartply with a field device parts list to replace existing devices which comply with Plant area ATEX requirements Smartply will complete procurement of these parts. The System Integrator is responsible for providing the client with a Blending plant area ATEX verification Dossier on project handover this should include all required information detailed in appendix 2. It will be the responsibility of the System integrator to provide updates for inclusion in the Smartply Explosion Protection Document (EPD)Project implementation Deliverables Project implementation phase must be full installed, commissioned, tested and handed over to the client following the plant 11-day maintenance shutdown. Project preparation work can be completed on plant maintenance days one per month. *** Please note the above is not the full scope of Works - See attached tender Document for the full more detailed scope of Works ***
Internal identifier : 0

5.1.1 Purpose

Main nature of the contract : Services
Main classification ( cpv ): 71314100 Electrical services
Additional classification ( cpv ): 48921000 Automation system
Additional classification ( cpv ): 72243000 Programming services
Additional classification ( cpv ): 38810000 Industrial process control equipment
Additional classification ( cpv ): 65320000 Operation of electrical installations
Additional classification ( cpv ): 71334000 Mechanical and electrical engineering services

5.1.2 Place of performance

Country subdivision (NUTS) : Dublin ( IE061 )
Country : Ireland
Additional information :

5.1.3 Estimated duration

Duration : 1 Month

5.1.5 Value

Estimated value excluding VAT : 675 000 Euro

5.1.6 General information

Reserved participation : Participation is not reserved.
Procurement Project not financed with EU Funds.

5.1.7 Strategic procurement

Aim of strategic procurement : No strategic procurement

5.1.9 Selection criteria

Sources of selection criteria : Procurement Document

5.1.11 Procurement documents

Languages in which the procurement documents are officially available : English
Languages in which the procurement documents (or their parts) are unofficially available : English
Deadline for requesting additional information : 29/10/2025 15:00 +01:00

5.1.12 Terms of procurement

Terms of submission :
Electronic submission : Required
Languages in which tenders or requests to participate may be submitted : English
Electronic catalogue : Not allowed
Tenderers may submit more than one tender : Not allowed
Deadline for receipt of tenders : 05/11/2025 15:00 +01:00
Information about public opening :
Opening date : 05/11/2025 15:30 +01:00
Terms of contract :
The execution of the contract must be performed within the framework of sheltered employment programmes : No

5.1.15 Techniques

Framework agreement :
No framework agreement
Information about the dynamic purchasing system :
No dynamic purchase system

5.1.16 Further information, mediation and review

Review organisation : The High Court of Ireland
Organisation providing offline access to the procurement documents : SmartPly Europe DAC
Organisation providing more information on the review procedures : The High Court of Ireland
Organisation receiving requests to participate : SmartPly Europe DAC
Organisation processing tenders : SmartPly Europe DAC

8. Organisations

8.1 ORG-0001

Official name : SmartPly Europe DAC
Registration number : Smartply Europe DAC
Postal address : Bellview
Town : Slieveure
Postcode : X91 PX75
Country subdivision (NUTS) : Dublin ( IE061 )
Country : Ireland
Telephone : 051 831427
Buyer profile : www.etenders.gov.ie
Roles of this organisation :
Buyer
Organisation providing offline access to the procurement documents
Organisation receiving requests to participate
Organisation processing tenders

8.1 ORG-0002

Official name : The High Court of Ireland
Registration number : The High Court of Ireland
Department : The High Court of Ireland
Postal address : Four Courts, Inns Quay, Dublin 7
Town : Dublin
Postcode : D07 WDX8
Country subdivision (NUTS) : Dublin ( IE061 )
Country : Ireland
Telephone : +353 1 8886000
Roles of this organisation :
Review organisation
Organisation providing more information on the review procedures

8.1 ORG-0003

Official name : European Dynamics S.A.
Registration number : 002024901000
Department : European Dynamics S.A.
Town : Athens
Postcode : 15125
Country subdivision (NUTS) : Βόρειος Τομέας Αθηνών ( EL301 )
Country : Greece
Telephone : +30 2108094500
Roles of this organisation :
TED eSender

Notice information

Notice identifier/version : 02bd8c5a-84e1-4c3c-99cd-cda929e41e98 - 01
Form type : Competition
Notice type : Contract notice – light regime
Notice dispatch date : 15/10/2025 16:04 +01:00
Languages in which this notice is officially available : English
Notice publication number : 00684493-2025
OJ S issue number : 200/2025
Publication date : 17/10/2025