Ex Ante Multi-nozzle multi-material chip-based extruder with real-time parameter adaptation

UT takes the position that the contract can be awarded directly to REGENHU SA due to the absence of competition for technical reasons within the meaning of Article 2.32 paragraph 1 sub b bullet 2 Public Procurement Act 2012. According to UT, there is also no reasonable alternative or substitute …

CPV: 38000000 Laboratory, optical and precision equipments (excl. glasses)
Place of execution:
Ex Ante Multi-nozzle multi-material chip-based extruder with real-time parameter adaptation
Awarding body:
Universiteit Twente
Award number:
EB -OUT 6607

1. Koper

1.1 Koper

Officiële naam : Universiteit Twente
Rechtsvorm van de koper : Publiekrechtelijke instelling
Activiteit van de aanbestedende dienst : Onderwijs

2. Procedure

2.1 Procedure

Titel : Ex Ante Multi-nozzle multi-material chip-based extruder with real-time parameter adaptation
Beschrijving : UT takes the position that the contract can be awarded directly to REGENHU SA due to the absence of competition for technical reasons within the meaning of Article 2.32 paragraph 1 sub b bullet 2 Public Procurement Act 2012. According to UT, there is also no reasonable alternative or substitute within the meaning of Article 2.32 paragraph 3 Public Procurement Act 2012 that can meet the reasonable requirements of UT, as stated below: Requirements 1.         Microfluidic Approach: Chip-based print head for customized microfluidic chips, with at least 4 reservoirs and flow control precision of at least 200 nl/s. 2.         Real-time Parameter Adaptation: Capability to adjust printing parameters in real-time during process. 3.         High-Performance Robotic Platform: Minimum resolution of 1 µm in each direction. 4.         High Process Automation: To minimize manual operations and operator-related risks. 5.         Built-in Calibration Procedures: To enhance process outcome quality. 6.         Wide range of dispensing technologies: The system should be able to accommodate different deposition technologies that can be combined in a single process, including extrusion, drop-on-demand, electrospinning/writing from solution and melt, core-shell, and multi-material mixing . Modular architecture would be needed, to implement flexible configurations. 7.         User Interface: Simplified for printing complex structures. 8.         Customization Capabilities: Readiness for future integration of custom printheads and software solutions with the existing system. 9.         Temperature Control Management: Independent temperature control for printheads and work zone. 10.       Laminar Flow and HEPA Filtering: To ensure sterile environment. 11.       Maximum Printing Speed: Not inferior to 50 mm/s. 12.       Printing Stage Dimensions: At least 130 mm x 90 mm x 60 mm.
Identificatiecode van de procedure : 85f2898d-dda7-4172-99e8-589180476c85
Eerdere aankondiging : 3f5263be-57ae-4fb8-be1f-885b6a95768d-01
Interne identificatiecode : EB -OUT 6607
Type procedure : Onderhandelingsprocedure zonder voorafgaande oproep tot mededinging

2.1.1 Doel

Aard van het contract : Leveringen
Belangrijkste classificatie ( cpv ): 38000000 Laboratoriuminstrumenten, optische en precisie-instrumenten (uitgezonderd brillen)

2.1.2 Plaats van uitvoering

Land : Nederland
Overal in het desbetreffende land
Aanvullende informatie : Zie documentatie

2.1.3 Waarde

Geraamde waarde exclusief btw : 240 000 Euro

2.1.4 Algemene informatie

Oproep tot mededinging is beëindigd
Rechtsgrondslag :
Richtlijn 2014/24/EU

5. Perceel

5.1 Technische ID van het kavel : LOT-0000

Titel : Ex Ante Multi-nozzle multi-material chip-based extruder with real-time parameter adaptation
Beschrijving : UT takes the position that the contract can be awarded directly to REGENHU SA due to the absence of competition for technical reasons within the meaning of Article 2.32 paragraph 1 sub b bullet 2 Public Procurement Act 2012. According to UT, there is also no reasonable alternative or substitute within the meaning of Article 2.32 paragraph 3 Public Procurement Act 2012 that can meet the reasonable requirements of UT, as stated below: Requirements 1.         Microfluidic Approach: Chip-based print head for customized microfluidic chips, with at least 4 reservoirs and flow control precision of at least 200 nl/s. 2.         Real-time Parameter Adaptation: Capability to adjust printing parameters in real-time during process. 3.         High-Performance Robotic Platform: Minimum resolution of 1 µm in each direction. 4.         High Process Automation: To minimize manual operations and operator-related risks. 5.         Built-in Calibration Procedures: To enhance process outcome quality. 6.         Wide range of dispensing technologies: The system should be able to accommodate different deposition technologies that can be combined in a single process, including extrusion, drop-on-demand, electrospinning/writing from solution and melt, core-shell, and multi-material mixing . Modular architecture would be needed, to implement flexible configurations. 7.         User Interface: Simplified for printing complex structures. 8.         Customization Capabilities: Readiness for future integration of custom printheads and software solutions with the existing system. 9.         Temperature Control Management: Independent temperature control for printheads and work zone. 10.       Laminar Flow and HEPA Filtering: To ensure sterile environment. 11.       Maximum Printing Speed: Not inferior to 50 mm/s. 12.       Printing Stage Dimensions: At least 130 mm x 90 mm x 60 mm.
Interne identificatiecode : EB -OUT 6607

5.1.1 Doel

Aard van het contract : Leveringen
Belangrijkste classificatie ( cpv ): 38000000 Laboratoriuminstrumenten, optische en precisie-instrumenten (uitgezonderd brillen)

5.1.2 Plaats van uitvoering

Land : Nederland
Overal in het desbetreffende land
Aanvullende informatie : Zie documentatie

5.1.5 Waarde

Geraamde waarde exclusief btw : 240 000 Euro

5.1.6 Algemene informatie

Aanbestedingsproject dat niet uit EU-fondsen wordt gefinancierd
De aanbesteding valt onder de Overeenkomst inzake overheidsopdrachten (GPA) : neen

5.1.7 Strategische aanbestedingen

5.1.10 Gunningscriteria

Criterium :
Type : Kwaliteit
Naam : eisen
Beschrijving : voldoet aan eisen
Categorie van het gunningscriterium drempel : Volgorde van belang
Gunningscriterium numerieke waarde : 1
Rechtvaardiging voor het niet vermelden van de weging van de gunningscriteria : Opbasis van de behaalde eisen

5.1.15 Technieken

Raamovereenkomst :
Geen raamovereenkomst
Informatie over het dynamische aankoopsysteem :
Geen dynamisch aankoopsysteem

5.1.16 Nadere inlichtingen, bemiddeling en evaluatie

Organisatie voor beroepsprocedures : Rechtbank Overijssel
Informatie over de termijnen voor beroep : Deadline voor bezwaar was 29 januari
Organisatie die het contract ondertekent : Universiteit Twente

6. Resultaten

Waarde van alle contracten toegekend in deze kennisgeving : 240 000 Euro
Onderhandse gunning :
Rechtvaardiging voor onderhandse gunning : De opdracht kan alleen door een bepaalde ondernemer worden uitgevoerd wegens het ontbreken van mededinging om technische redenen
Andere rechtvaardiging : Zie Motivatie

6.1 ID resultaat perceel : LOT-0000

Er is ten minste één winnaar gekozen.

6.1.2 Informatie over winnaars

Winnaar :
Officiële naam : REGENHU SA
Inschrijving :
Identificatiecode van de inschrijving : EB-OUT 6607
Identificatiecode van het perceel of de groep percelen : LOT-0000
Waarde van de aanbesteding : 320 000 Euro
Onderaanneming : Neen
Informatie over het contract :
Identificatiecode van het contract : EB-OUT 6607
Titel : Multi-nozzle multi-material chip-based extruder with real-time parameter adaptation
Datum waarop de winnaar is gekozen : 07/01/2025
Organisatie die het contract ondertekent : Universiteit Twente

6.1.4 Statistische informatie

Samenvatting van de door de koper ontvangen beroepen :
Aantal klagers : 0
Ontvangen inschrijvingen of verzoeken tot deelname :
Type van de ontvangen inschrijvingen : Inschrijvingen
Aantal ontvangen inschrijvingen of verzoeken tot deelname : 1

8. Organisaties

8.1 ORG-0001

Officiële naam : Universiteit Twente
Registratienummer : 50130536
Postadres : Drienerlolaan 5
Stad : Enschede
Postcode : 7522NB
Onderverdeling land (NUTS) : Twente ( NL213 )
Land : Nederland
Contactpunt : Camilio Delfgaauw
Telefoon : +31534891512
Internetadres : https://www.utwente.nl
Rollen van deze organisatie :
Koper
Organisatie die het contract ondertekent

8.1 ORG-0002

Officiële naam : Rechtbank Overijssel
Registratienummer : 82940525
Stad : Almelo
Postcode : 7607 GB
Onderverdeling land (NUTS) : Twente ( NL213 )
Land : Nederland
Telefoon : (+31)0883611042
Rollen van deze organisatie :
Organisatie voor beroepsprocedures

8.1 ORG-0003

Officiële naam : REGENHU SA
Omvang van de ondernemer : Micro, klein of middelgroot
Registratienummer : CHE-113.959.941 TVA
Stad : Villaz-ST-Pierre
Postcode : 1690
Onderverdeling land (NUTS) : Fribourg / Freiburg ( CH022 )
Land : Zwitserland
Telefoon : +41266537220
Rollen van deze organisatie :
Inschrijver
Winnaar van deze percelen : LOT-0000

Informatie over een aankondiging

Identificatiecode/versie van de aankondiging : b1baa306-2927-4db8-8ea3-ee752088071e - 02
Type formulier : Resultaat
Type aankondiging : Aankondiging van een gegunde opdracht of concessie – standaardregeling
Verzenddatum van de aankondiging : 02/07/2025 12:44 +00:00
Aankondiging datum verzending (eSender) : 02/07/2025 12:44 +00:00
Talen waarin deze aankondiging officieel beschikbaar is : Nederlands Engels
Publicatienummer aankondiging : 00429696-2025
Nummer uitgave PB S : 125/2025
Datum van bekendmaking : 03/07/2025