Ultrasonic metal powder atomizer

An ultrasonic metal powder atomizer is to be acquired by the Luleå University of Technology for research and development purposes. This equipment will be housed in the xx, which is dedicated to studies and research. The ultrasonic metal powder atomizer will support researchers at Luleå University of Technology in developing …

CPV: 38000000 Laboratorieudstyr, optisk udstyr og præcisionsudstyr (ikke briller), 71900000 Laboratorieundersøgelser
Henrettelsessted:
Ultrasonic metal powder atomizer
Tildelende organ:
Luleå tekniska universitet
Tildelingsnummer:
LTU-4302-2024

1. Upphandlare

1.1 Upphandlare

Officiellt namn : Luleå tekniska universitet
Köparens rättsliga status : Statlig myndighet
Den upphandlande myndighetens verksamhet : Utbildning

2. Förfarande

2.1 Förfarande

Titel : Ultrasonic metal powder atomizer
Beskrivning : An ultrasonic metal powder atomizer is to be acquired by the Luleå University of Technology for research and development purposes. This equipment will be housed in the xx, which is dedicated to studies and research. The ultrasonic metal powder atomizer will support researchers at Luleå University of Technology in developing new materials on a small scale, specifically for 3D printing applications. This addition will greatly benefit courses such as chemistry, electronics, materials science, and physics, among others. Therefore, the equipment must be user-friendly, easy to maintain, and compact enough to fit within the laboratory space. Furthermore, it should be capable of working with small batches of metals while still producing powder of the desired size. The equipment should support cutting-edge materials research. The primary target materials are magnesium (Mg) and titanium (Ti), which are crucial in biomedical applications. However, the equipment should not be limited to these metals; it should also be versatile enough to handle zinc (Zn), stainless steel, and other ferrous materials, enabling a broad range of research possibilities. As Luleå University of Technology is known for its advanced materials science research facilities, the ultrasonic metal powder atomizer will enhance the efficiency of research projects. It will provide researchers and students with the opportunity to develop new materials specifically for 3D printing technologies, further strengthening the university's position at the forefront of materials science innovation.
Förfarandets identifierare : deb6f320-e4eb-4834-8f9a-3ac429db9808
Intern identifierare : LTU-4302-2024
Typ av förfarande : Öppet
Förfarandet är påskyndat : nej
Motivering för det påskyndade förfarandet :
Förfarandets viktigaste kännetecken :

2.1.1 Föremålet för upphandlingen

Kontraktets art : Varor
Huvudklassificering ( cpv ): 38000000 Laboratorieutrustning, optisk utrustning och precisionsutrustning (exkl. glas)
Ytterligare klassificering ( cpv ): 71900000 Laboratorietjänster

2.1.2 Leveransplats

Del av land (NUTS) : Norrbottens län ( SE332 )
Land : Sverige
Kompletterande information : -

2.1.3 Värde

Beräknat värde exklusive moms : 2 000 000 Svensk krona

2.1.4 Allmänna upplysningar

Rättslig grund :
Direktiv 2014/24/EU
Tillämplig gränsöverskridande lagstiftning :

5. Del (anbudsområde)

5.1 Tekniskt ID för partiet : LOT-0001

Titel : Ultrasonic metal powder atomizer
Beskrivning : An ultrasonic metal powder atomizer is to be acquired by the Luleå University of Technology for research and development purposes. This equipment will be housed in the xx, which is dedicated to studies and research. The ultrasonic metal powder atomizer will support researchers at Luleå University of Technology in developing new materials on a small scale, specifically for 3D printing applications. This addition will greatly benefit courses such as chemistry, electronics, materials science, and physics, among others. Therefore, the equipment must be user-friendly, easy to maintain, and compact enough to fit within the laboratory space. Furthermore, it should be capable of working with small batches of metals while still producing powder of the desired size. The equipment should support cutting-edge materials research. The primary target materials are magnesium (Mg) and titanium (Ti), which are crucial in biomedical applications. However, the equipment should not be limited to these metals; it should also be versatile enough to handle zinc (Zn), stainless steel, and other ferrous materials, enabling a broad range of research possibilities. As Luleå University of Technology is known for its advanced materials science research facilities, the ultrasonic metal powder atomizer will enhance the efficiency of research projects. It will provide researchers and students with the opportunity to develop new materials specifically for 3D printing technologies, further strengthening the university's position at the forefront of materials science innovation.
Intern identifierare : Ultrasonic metal powder atomizer

5.1.1 Föremålet för upphandlingen

Kontraktets art : Varor
Huvudklassificering ( cpv ): 38000000 Laboratorieutrustning, optisk utrustning och precisionsutrustning (exkl. glas)
Ytterligare klassificering ( cpv ): 71900000 Laboratorietjänster

5.1.2 Leveransplats

Del av land (NUTS) : Norrbottens län ( SE332 )
Land : Sverige
Kompletterande information : -

5.1.3 Uppskattad löptid

Startdatum : 01/01/2025
Slutdatum för varaktighet : 02/01/2026

5.1.5 Värde

Beräknat värde exklusive moms : 2 000 000 Svensk krona

5.1.6 Allmänna upplysningar

Upphandlingsprojekt som inte finansieras med EU-medel
Upphandlingen omfattas av Världshandelsorganisationens avtal om offentlig upphandling, GPA : nej

5.1.7 Strategisk upphandling

Syftet med strategisk upphandling : Minskning av miljöpåverkan
Metod som ska minska miljöpåverkan : Annat

5.1.10 Tilldelningskriterier

Kriterium :
Typ : Pris
Namn :
Beskrivning :
Beskrivning av den metod som ska användas om viktning inte kan uttryckas med kriterierna :
Motivering varför viktningen av tilldelningskriterierna inte har uppgetts :

5.1.15 Metoder

Ramavtal :
Upphandlingen avser inte ett ramavtal
Information om det dynamiska inköpssystemet :
Upphandlingen avser inte ett dynamiskt inköpssystem

5.1.16 Kompletterande information, medling och prövning

Prövningsorganisation : Förvaltningsrätten i Luleå
Organisation som ger kompletterande information om upphandlingsförfarandet : Luleå tekniska universitet

6. Resultat

Värdet av alla de kontrakt som tilldelas i det här förfarandet : 2 000 000 Svensk krona

6.1 Resultat – delkontraktets id : LOT-0001

Minst en vinnare har valts ut.

6.1.2 Information om vinnarna

Verklig ägare :
Officiellt namn : AMAZEMET Sp. z o.o.
Anbud :
Identifierare för anbudsgivare : 1
Identifierare för del eller grupp av delar : LOT-0001
Anlitande av underleverantör : Ännu ej känt
Information om kontraktet :
Identifierare för kontraktet : Contract 226978 (0001)
Datum då vinnaren utsågs : 09/12/2024
Datum för ingående av kontraktet : 03/01/2025
Kontraktet tilldelas inom ett ramavtal : nej

6.1.4 Statistisk information

Inkomna anbud eller intresseanmälningar :
Typ av inlämningar : Anbud
Antal anbud, anbudsansökningar och intresseanmälningar som inkommit : 1

8. Organisationer

8.1 ORG-0001

Officiellt namn : Luleå tekniska universitet
Registreringsnummer : 202100-2841
Postadress : Universitetsområdet Porsön
Ort : Luleå
Postnummer : 971 87
Land : Sverige
Kontaktpunkt : Zebastian Wanstål
Tfn : 46768312129
Köparprofil : http://www.ltu.se/
Den här organisationens roller :
Upphandlare
Organisation som ger kompletterande information om upphandlingsförfarandet

8.1 ORG-0002

Officiellt namn : Förvaltningsrätten i Luleå
Registreringsnummer : 202100-2742
Postadress : Skeppsbrogatan 43
Ort : Luleå
Postnummer : 97231
Land : Sverige
Tfn : +46 920295490
Den här organisationens roller :
Prövningsorganisation

8.1 ORG-0003

Officiellt namn : AMAZEMET Sp. z o.o.
Registreringsnummer : 0000780516
Postadress : al. Jana Pawła II 27
Ort : Warszawa
Postnummer : 00-867
Land : Sverige
Kontaktpunkt : Adrian Truszkowski
E-postadress : sales@amazemet.com
Tfn : +48 573 481 303
Den här organisationens roller :
Anbudsgivare
Vinnare av de här delkontrakten : LOT-0001

11. Information om meddelandet

11.1 Information om meddelandet

Identifierare/version för meddelandet : c302051d-5052-4cfc-8f8f-384079d243c5 - 01
Formulärtyp : Resultat
Meddelandetyp : Meddelande om upphandlings- eller koncessionstilldelning – standardsystem
Avsändningsdatum för meddelandet : 27/01/2025 09:44 +01:00
Språk som det här meddelandet finns officiellt tillgängligt på : svenska

11.2 Publiceringsinformation

Meddelandets publiceringsnummer : 00061974-2025
EUT S-nummer : 20/2025
Publiceringsdatum : 29/01/2025